kascecell.blogg.se - Ebay dc5 field genius

#Ebay dc5 field genius how to
#Ebay dc5 field genius Pc
#Ebay dc5 field genius windows 7
#Ebay dc5 field genius windows

Try disconnecting from your network entirely, then logging back on and repeating the steps above. Some useful tips if you can’t get this to work: try WPA2 (AES) instead of WPA (TKIP). If the “Data Rate” is showing as 54 Mbps or lower, browse to Wireless > Basic, click on “Site Survey” and try re-connecting to your network until it connects at the highest speed.

#Ebay dc5 field genius windows

Next, right-click your wireless network (bottom right corner of your Windows desktop), select “Status,” and under “Connection” verify that you’re connected at a speed at or near 300 Mbps (your actual speed will typically be 50 Mbps lower than your advertised speed, but you shouldn’t have a loss of more than 100 Mbps). Make sure the “Data Rate” under “WLAN Repeater Information” is 300 Mbps or greater. To ensure that your repeater is connecting at the fastest possible speed (above 1GB on new fiber connections, but with today’s technology requirements you should shoot for at least 300 Mbps), we recommend you connect to your repeater by typing “//192.168.1.2” into your web browser’s address bar and browsing to Wireless > Status. Make Sure You’re Getting At Least 300N Speeds

You should notice a marked increase in connection speed.

Disconnect and re-connect to your wireless connection on your PC.

You can now move your wireless repeater to a location halfway between your router and your PC.

If not, see the troubleshooting section below.

You should see a message that you connected successfully.

Find the SSID of your wireless network and select “Connect.”.

Note that this repeater is not compatible with the newer 5 GHz band, available on dual-band routers. Select your network band (we recommend 2.4 GHz (B+G+N), where N allows speeds up to 300mbps or faster.

Enter the SSID that matches the name of your wireless network (we initially tried giving the repeater a unique name but couldn’t get it to connect).

Enter your wireless repeater user ID and password (usually admin/admin by default – you’ll want to change these once in).

Browse to the IP address of your repeater in a browser window (i.e.

Default gateway: 192.168.1.2 (substitute with the IP address of your wireless repeater – should be specified in the documentation).

Change “Obtain an IP address automatically” to “Use the following IP address.” Then enter:.

Select “Internet Protocol Version 4 (TCP/IPv4)” (select TCP/IP Protocol is there is only one version) and click on “Properties.”.

Left-click the connection, and select “Properties.”.

“Local Area Connection”) under “View your active networks.”

If your wireless repeater is recognized by your PC, you should see it as a wired network (i.e.

If you get stuck, please comment below and we’ll provide detailed instructions), type “Network and Sharing Center” into your Start Menu search box, and hit enter.

#Ebay dc5 field genius windows 7

In Windows 7 (the steps are similar for other operating systems.

#Ebay dc5 field genius Pc

First, plug your repeater into the wall next to your PC with the supplied power cord, and connect the repeater to your PC’s Internet/LAN input (a broadband “phone jack” type plug that is wider than your phone plug connector”).

Step-By-Step Instructions On Getting Your Repeater Up And Running

#Ebay dc5 field genius how to

So we’ll be skipping straight to manual setup and showing you how to set up your repeater. In fact, with most modern routers and network configurations, WPS is more of a pain than anything. Regardless of what the setup instructions say, the WPS “easy setup” mode is not easy. Our experts review the best WiFi routers and extenders, including the new mesh systems. Technological advancements have gone up, and costs have come down. Or better yet, don’t’ tear your hair out! Just get a replacement. Would you prefer to have an expert help you out? We review Best Buy’s GeekSquad.